100 g Plantaserv N Natural Preservative


Zoom image

100 g Plantaserv N Natural Preservative

Product number: RMPVA100N
AU$33.00

Product Description


Ingredients: Glyceryl Caprylate, Undecylenic Glycerides

 

INCI: Glyceryl Caprylate, Glyceryl Undecylenate

Use Levels: 0.9-1.1%

Origin: Natural: Mixed vegetable oils. 

Heat Tolerance: Good up to 90C so can be added into the water phase of an emulsion before mixing or added at the end of manufacture.

Microbes Targeted:  Broad-Spectrum (Bacteria, Yeast and Mould).   Like many natural preservatives, this is slower to act than some of our synthetic options and as such could become overwhelmed in more challenging environments when used as the stand-alone preservative. Some examples of high risk formulations include those containing pigments (Zinc Oxide, Titanium Dioxide, mica, clays etc), those containing herbs or proteins.

We recommend an evidence-based approach to optimising your product's preservation strategy and as such advise undertaking stability and micro testing to inform your formulating decisions in this area.

Best Suited To:  Can be used in all formulations but best in O/W or W/O emulsions.  This preservative also has a slight emollient action thus improving the feel of your product.

Added Benefits:  This is an allowable input into an organic formulation. It is a versatile preservative that has a very mild odour and no colour.  This product is also great for products for problem skin as the glyceryl caprylate has some anti-bacterial properties.

Ingredient Form:  This ingredient can be supplied as a liquid or a solid depending on the outside temperature - it has a melting point of around 30C.  It is best to heat it to 80C to get it to mix into water or use a co-solubiliser to help it mix in.

Avoid These Conditions: Avoid pH over 7 to prevent the glyceryl caprylate from hydrolysing. This preservative can have an impact on viscosity meaning that your cream may get slightly to significantly thinner when this preservative is added.  This may not happen but we advise running a small batch test the first time you use a new preservative.  

Using in a spritz spray: If you are wishing to use this preservative in a spritzer we recommend pre-mixing this preservative into alcohol to get better solubility and performance in your product. The amount of alcohol required may vary from 1-10% of the formula depending on how much preservative you are adding and how well your essential oils are solubilised.  We generally don't opt for this preservative as the first choice because of the limited water solubility of this ingredient but if for whatever reason you do want to use it you can usually find a way to make it work.

Please note: This product may come with less than a 9 month shelf life. If used within the specified shelf life, it will not affect the preservative efficacy in a product.

ALSO NOTE THAT THE FORM OF THIS PRODUCT VARIES BASED ON AMBIENT TEMPERATURE.  IN COLD WEATHER THIS WILL APPEAR AS A SOFT,  CRYSTALINE SOLID.  IN WARM WEATHER IT APPEARS AS A LIQUID.  IN EITHER STATE THE CHEMISTRY AND CONCENTRATION IS THE SAME.


Disclaimer

New Directions Australia Pty Ltd. does not supply food grade raw materials and therefore cannot waive GST.

Prior to use: Customers should always refer to the Material Safety Data Sheet / Specification Sheet OR the ingredients label as affixed to each product which are current at the time of supply of the product.

The information provided is for educational purposes only. Individuals receiving this information must exercise their independent judgment in determining its appropriateness for a particular purpose or use.

As the ordinary or otherwise use(s) of products is outside the control of New Directions Australia Pty Ltd., no representation or warranty, expressed or implied, is made as to the effect(s) of such use(s), (including damage or injury), or the results obtained. New Directions Australia Pty Ltd. expressly disclaims responsibility as to the ordinary or otherwise use(s). Furthermore, nothing contained herein should be considered as a recommendation by New Directions Australia Pty Ltd. as to the fitness for any use. The liability of New Directions Australia Pty Ltd. is limited to the value of the goods and does not include any consequential losses.

New Directions Australia Pty Ltd. shall not be liable for any errors or delays in the content, or for any actions taken in reliance thereon.

New Directions Australia Pty Ltd. shall not be responsible for any damages resulting from use of or reliance upon this information.

The user of the product is solely responsible for compliance with all laws and regulations applying to the use of the products, including intellectual property rights of third parties.

The products contained in this website are represented in as true a manner, as photographic processes and printing will allow. The images contained in this website are for illustrative purposes only. If you have any questions with regard to how products are packaged or labeled, please contact your account manager at our Marrickville Head Office.

As the availability of ingredients and raw materials is not always certain whether due to changes in nature or otherwise, New Directions Australia Pty Ltd. reserves the right to substitute alternate ingredients/raw materials in the manufacture of its products and bases in order to maintain supply to its customers.

New Directions Australia Pty Ltd. is a wholesaler of natural skin care products and natural raw materials. If you intend to re-label our products under your own name/ brand for the purpose of on-selling or retailing, we strongly recommend that you keep up to date with constant changing labeling laws. Please visit www.accc.gov.au or www.nicnas.gov.au . New Directions Australia Pty Ltd. cannot be held responsible for consequential loss/ product recall due to incorrect labeling.

Note: Individuals receiving any information contained in this website must exercise their independent judgment in determining its appropriateness for a particular purpose or use. As with any manufacturing process, New Directions encourages small, lab-scale manufacturing for evaluation purposes prior to full commercial manufacturing.