500 g Solubiliser


Zoom image

500 g Solubiliser

Product number: RMSE500SOLU
AU$23.10

Product Description


Ingredients: Polysorbate 20, Alcohol

 

Our Solubiliser blend was developed to make the process of solubilising aromatic oils to a spritz based formula an easier and more convenient process, taking away the need to purchase high strength alcohol as a stand-alone ingredient.

Important Note:

Solubilisation is relative not absolute.

What that means is one ingredient may soluble or able to be solubilised into another under some conditions but that doesn't mean it will happen under all or any conditions. 

For example, you may find it easy to solubilise 1% lavender oil into demineralised water using 3% of our solubiliser but when you try to solubilise 5% lavender you can't make it work.  Another example is between oils so again lavender may be easy to work with but you just can't get peppermint to solubilise. 

This fact means it is always best to assume you need to test each different combination or formula tweak you come up with and to keep an open mind to trying other solubilisers when using a range of different aromatics.

Formulation tips:

1. Start off with 3 times more solubiliser than aromatic and make a pre-blend of the two before moving on to the next step.

2. Add a little of your water to the pre-blend of step 1 and mix. We recommend around 20% of your water phase be used at this point.  If the solubiliser: aromatic ratio is working the mixture will go crystal clear. If it is not quite working well enough you may get a slightly blue/ cloudy looking mix that is not quite clear but getting there.  If it is a fair way off (or won't work at all) the mixture will look very milky.

3. Depending on how step 2 goes you may have to add more solubiliser or you can carry on and finish adding the rest of your ingredients.  Note that as every ingredient impacts solubility it is not unheard of for the preservative or another additive to de-solubilise the product again.  If this happens try adding more solubilser.

4. Repeat until the mixture is crystal clear or until your solubiliser: aromatic ratio exceeds 8:1.  

Keep in mind that vegetable oils can't be solubilised this way, we are only talking about aromatics.

Also stick to no more than 2% aromatic as beyond that it becomes very difficult to create a stable product.

This ingredient is often used as part of an emulsification system and as such you may find this article on HLB useful.


Disclaimer

New Directions Australia Pty Ltd. does not supply food grade raw materials and therefore cannot waive GST.

Prior to use: Customers should always refer to the Material Safety Data Sheet / Specification Sheet OR the ingredients label as affixed to each product which are current at the time of supply of the product.

The information provided is for educational purposes only. Individuals receiving this information must exercise their independent judgment in determining its appropriateness for a particular purpose or use.

As the ordinary or otherwise use(s) of products is outside the control of New Directions Australia Pty Ltd., no representation or warranty, expressed or implied, is made as to the effect(s) of such use(s), (including damage or injury), or the results obtained. New Directions Australia Pty Ltd. expressly disclaims responsibility as to the ordinary or otherwise use(s). Furthermore, nothing contained herein should be considered as a recommendation by New Directions Australia Pty Ltd. as to the fitness for any use. The liability of New Directions Australia Pty Ltd. is limited to the value of the goods and does not include any consequential losses.

New Directions Australia Pty Ltd. shall not be liable for any errors or delays in the content, or for any actions taken in reliance thereon.

New Directions Australia Pty Ltd. shall not be responsible for any damages resulting from use of or reliance upon this information.

The user of the product is solely responsible for compliance with all laws and regulations applying to the use of the products, including intellectual property rights of third parties.

The products contained in this website are represented in as true a manner, as photographic processes and printing will allow. The images contained in this website are for illustrative purposes only. If you have any questions with regard to how products are packaged or labeled, please contact your account manager at our Marrickville Head Office.

As the availability of ingredients and raw materials is not always certain whether due to changes in nature or otherwise, New Directions Australia Pty Ltd. reserves the right to substitute alternate ingredients/raw materials in the manufacture of its products and bases in order to maintain supply to its customers.

New Directions Australia Pty Ltd. is a wholesaler of natural skin care products and natural raw materials. If you intend to re-label our products under your own name/ brand for the purpose of on-selling or retailing, we strongly recommend that you keep up to date with constant changing labeling laws. Please visit www.accc.gov.au or www.nicnas.gov.au . New Directions Australia Pty Ltd. cannot be held responsible for consequential loss/ product recall due to incorrect labeling.

Note: Individuals receiving any information contained in this website must exercise their independent judgment in determining its appropriateness for a particular purpose or use. As with any manufacturing process, New Directions encourages small, lab-scale manufacturing for evaluation purposes prior to full commercial manufacturing.